Thank you for subscribing to Paratherm TipSheet, a short, monthly technical email series for users of thermal fluids and hot oil systems.

TipSheet is a service of the Paratherm Corporation. The details are applicable to all heat transfer fluids in closed or vented hot-oil systems.

At some point in any project involving a new thermal fluid system, somebody will decide that vapor pressure is an important property that should be considered in fluid selection. There will be talk of pump cavitation along with a nitrogen blanket on the expansion tank with the extra costs for high-pressure components. All of these issues will quickly be reinforced by the thermal-fluid salesman with (you guessed it ) the lowest vapor pressure.

What can be confusing is that some aromatic-based fluids have higher vapor pressure and coincidentally require more exotic sealing on pumps and valves because of VOC issues. What cuts through the confusion is that all fluid manufacturers specify Schedule 40 seamless piping, 300# flanges and some type of graphite gaskets. On the equipment side, most suppliers build their expansion tanks to ASME code regardless of the fluid chosen. So the bottom line is that vapor pressure has little effect on the overall cost of a heat transfer system.

One point that does require extra attention--don't confuse "smoke" with vapor pressure. Most thermal-fluid leaks are due to seepage through gaskets, pump seals, valve stems, etc. Regarding such seepage, what will have more of an effect than vapor pressure is whether the fluid is also a good solvent---such as many aromatic-based fluids (which, again coincidentally, typically have higher vapor pressures).

Next tip --- FLUID PROPERTIES EXPLAINED --- PART 3, HOW TO COMPARE FLUIDS -- INSIDE FILM COEFFICIENT will discuss physical and thermal properties and how to relate them to choosing fluids for specific applications. Also in the next issue, TipSheet will offer a comprehensive HEAT TRANSFER FLUID PROPERTIES technical data sheet in PDF format, combining the information from this three-part series, and more, to help you decide what's important in choosing a fluid for your application, and what's not.... Can't wait? Call us at 800-222-3611, or email info@paratherm.com

 

---

Watch for the new THERMAL FLUID PROPERTIES EXPLAINED tipsheet in the next month or so.

 

---

If you have a colleague who would benefit from this information,
please feel free to forward this email.

If this newsletter has been forwarded to you, and you'd like to receive it on a monthly basis, please click tipsheet@aweber.com. or
...to subscribe via email.No need to type anything into the subject line or message section to confirm.
To subscribe via RSS visit http://www.paratherm.com/tipsheet.asp   To view previous installments of the Tipsheet Series, visit http://www.paratherm.com/tipsheet.asp

---

© 2006 Paratherm Corporation
http://www.paratherm.com
Any voluntary information that you choose to share with Paratherm will remain in our company database and will be shared only with our technical representatives in order to assist you. Any analysis of this information we perform is to learn how to better serve our customers, whether that be through website design, direct contact with customers, or advertising choices. Your information will never be passed on to any advertisers or mailing list companies.